home *** CD-ROM | disk | FTP | other *** search
- Path: news.bridge.net!not-for-mail
- From: coyote@news.bridge.net (Al Anger)
- Newsgroups: comp.sys.cbm
- Subject: Re: MPS 1200 Printer
- Date: 4 Apr 1996 21:17:02 GMT
- Organization: BridgenetLC - 305.374.3031 - 100 S. Biscayne Blvd, Miami
- Message-ID: <4k1e8e$6vj@news.bridge.net>
- References: <4k0r4m$u7n@maggie.ionsys.com>
- NNTP-Posting-Host: newworld.bridge.net
- X-Newsreader: TIN [UNIX 1.3 950824BETA PL0]
-
- G. Gikas (xidex) (xidex@bart.ionsys.com) wrote:
- > Hey Folks....
- >
- > Would anyone happen to know what each of the eight little dip switches mean
- > inside the Commodore MPS 1200 Printer?? If you know what each does, please
- > get back to me.
- >
- > Thanks...
- >
- > E+Mail: xidex@ionsys.com
- >
-
- My manual suggests removing the device interface cartridge to change the
- switches, but I have done it from inside the machine.
-
-
- Switch Off On
- 1 - Device Select 4 5
- 2 - ASCII Translation Pet ASCII
- 3 - Control Code Mode C= Epson
- 4 - NLQ/Draft Draft NLQ
- 5 - Page Length 11" 12"
- 6 - Paper End Detect Enable Disable
- 7 - Auto Line Feed Disable Enable
- 8 - Pica/Compressed Pica Compressed
-
- Switch 7 is only valid when switch 3 is on.
-
-
- Switch 2 Switch 3
-
- Off . . . . . Off. . . MPS 801, MPS 803 emulation
- (EasyScript,PaintShop,BitMap stuff)
- Off . . . . . On . . . Basic programmers mode, standard control
- codes apply
- On . . . . . On . . . Epson FX emulation for ASCII printer drivers
- (embedded escape sequences mode)
-
- Hope that helps...
-
- From:
- The creator of the C= 128 Tower on the cover of Commodore World #10
- ---------------------------------------------------------------------
- Wile E. Coyote coyote@bridge.net
-
- A rose by any other name would still have thorns.
- ======================================================================
-